Scaling the Entire MAF Table by a Percentage

This is probably the most common method used by do-it-yourselfers using LS1Edit.  You will just scale the entire MAF table by a percentage (i.e. 3%, 5%, 10%, etc.) until you bring your LTFT between negative (-2) and negative eight (-8). 

This is fine for a lot of applications but why not go the extra mile and do a better job.  I like having my LTFT around the same number and in the range of negative two (-2).  Scaling the entire MAF table by a percentage will most likely not accomplish that goal but will get your LTFT's negative once you find the right factor to scale by.  In the example below, you can see the MAF table is about to be scaled by 3%.

Web Author: Eric Barger  help@installuniversity.com
Copyright © 1999 - 2002  Eric Barger.  All rights reserved.
Revised: June 06, 2003.